How to print out the feasibility in Baron while running
Posted: Wed Sep 14, 2022 10:25 pm
Currently, I am using BARON through GAMS. The ususal output printed during solving is like the following. It only shows the upper and lower bound on the objective at every iteration
Iteration Open nodes Time (s) Lower bound Upper bound
1 1 86.10 0.00000 0.100000E+52
5 3 127.89 0.00000 0.100000E+52
6 4 167.82 0.00000 0.100000E+52
12 7 209.01 0.00000 0.100000E+52
14 8 265.94 0.00000 0.100000E+52
61 31 313.80 0.00000 0.100000E+52
79 40 379.44 0.00000 0.100000E+52
103 52 412.32 0.00000 0.100000E+52
108 55 458.68 0.00000 0.100000E+52
109 55 501.58 0.00000 0.100000E+52
121 61 531.93 0.00000 0.100000E+52
157 79 581.79 0.00000 0.100000E+52
166 84 624.81 0.00000 0.100000E+52
193 97 655.01 0.00000 0.100000E+52
How can I print out the current feasibility of the solution while the solver is running (like any other solvers do)?
Iteration Open nodes Time (s) Lower bound Upper bound
1 1 86.10 0.00000 0.100000E+52
5 3 127.89 0.00000 0.100000E+52
6 4 167.82 0.00000 0.100000E+52
12 7 209.01 0.00000 0.100000E+52
14 8 265.94 0.00000 0.100000E+52
61 31 313.80 0.00000 0.100000E+52
79 40 379.44 0.00000 0.100000E+52
103 52 412.32 0.00000 0.100000E+52
108 55 458.68 0.00000 0.100000E+52
109 55 501.58 0.00000 0.100000E+52
121 61 531.93 0.00000 0.100000E+52
157 79 581.79 0.00000 0.100000E+52
166 84 624.81 0.00000 0.100000E+52
193 97 655.01 0.00000 0.100000E+52
How can I print out the current feasibility of the solution while the solver is running (like any other solvers do)?