Dear All,
I'm in the process of choosing a modeling environment for my research project and would be extremly thankful to hear your experienced opinions on following:
my task is to perform global optimizations (probably based on MINLP) on industrial energy systems including electricity/heat storage options and renewable energy modules.
After some research on the different available tools my thoughts are followings:
- Modelica and Matlab provide really good model librarys: for example Modelica offers the libraries TechThermo for energy storage systems, WindPowerPlants for Wind Turbines, ElectricalEnergyStorage, PhotoVoltaics etc.
- the current most powerful optimization tools are available under GAMS modeling language (solvers CPLEX, Baron for example);
As optimization is going to be a core process in my project (and we already have a license for in my Research Institute), my preference is to use GAMS. However, I found very few models in the GAMS Model Library that could help me for my work and they seem to deal with entire systems (like for example Simultaneous Optimization for Hen Synthesis).
Do you know if there are models available for energy system components like for example a model for CHP, solar collectors or heat/electricity storage technologies? And where I could find such models?
Thanks!
Hélène
GAMS vs Matlab vs Modelica
-
- User
- Posts: 9
- Joined: 7 years ago
- Location: Stuttgart, Germany
Re: GAMS vs Matlab vs Modelica
Hi,
here are two simple power models (but that are probably the ones you found already):
https://www.gams.com/latest/gamslib_ml/ ... magic.html
https://www.gams.com/latest/gamslib_ml/ ... rkpow.html
There is also a (very simple) CHP model packed into an Excel application:
https://www.gams.com/latest/datalib_ml/ ... _CHP2.html
Maybe this book will be interesting for you:
https://www.amazon.com/Power-System-Opt ... 3319623494
The table of content can be found here:
http://bit.ly/2t9QkcF
Best regards,
Lutz
here are two simple power models (but that are probably the ones you found already):
https://www.gams.com/latest/gamslib_ml/ ... magic.html
https://www.gams.com/latest/gamslib_ml/ ... rkpow.html
There is also a (very simple) CHP model packed into an Excel application:
https://www.gams.com/latest/datalib_ml/ ... _CHP2.html
Maybe this book will be interesting for you:
https://www.amazon.com/Power-System-Opt ... 3319623494
The table of content can be found here:
http://bit.ly/2t9QkcF
Best regards,
Lutz
-
- User
- Posts: 9
- Joined: 7 years ago
- Location: Stuttgart, Germany
Re: GAMS vs Matlab vs Modelica
Great, thank you very much Lutz!
From what I see online, the book that you recommend has not yet been released...however I'm sure it will be of great help once it is!
From what I see online, the book that you recommend has not yet been released...however I'm sure it will be of great help once it is!