814 GDX container with UNDF data values

Archive of Gamsworld Google Group
Post Reply
Archiver
User
User
Posts: 7876
Joined: 7 years ago

814 GDX container with UNDF data values

Post by Archiver »


Hello everyone,

I am trying to balance a social accounting matrix using the pep (Université Laval) GAMS code but I am getting the following error: 814 GDX container with UNDF data values. I don't understand why. I do not have any undefined value. I have checked carefully but haven't managed to solve it yet. I would really appreciate if you could take a quick look at it and help me fix it please! The SAM has only minor unbalances, as you will see in the excel file. Please find attached my files.

Thank you very much for your time and answer!

Best,
Luis Añorve,
University of Bonn

--
Attachments
sambal.zip
(27.75 KiB) Downloaded 483 times
Archiver
User
User
Posts: 7876
Joined: 7 years ago

RE: 814 GDX container with UNDF data values

Post by Archiver »


Hi José



Your file is an exel file with xlsx as extension. In your code you have xls instead of xlsx in the gdxxrw command. Runs fine after correction.



Cheers

Renger

____________________

Modelworks

Gewerbestrasse 15

3600 Thun – Switzerland

+41 79 818 53 73

Info@modelworks.ch

blog.modelworks.ch





From: gamsworld@googlegroups.com [mailto:gamsworld@googlegroups.com] On Behalf Of José Luis Viveros Añorve
Sent: Freitag, 28. Februar 2014 21:04
To: gamsworld@googlegroups.com
Subject: 814 GDX container with UNDF data values



Hello everyone,



I am trying to balance a social accounting matrix using the pep (Université Laval) GAMS code but I am getting the following error: 814 GDX container with UNDF data values. I don't understand why. I do not have any undefined value. I have checked carefully but haven't managed to solve it yet. I would really appreciate if you could take a quick look at it and help me fix it please! The SAM has only minor unbalances, as you will see in the excel file. Please find attached my files.



Thank you very much for your time and answer!



Best,

Luis Añorve,

University of Bonn

--
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+unsubscribe@googlegroups.com.
To post to this group, send email to gamsworld@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/groups/opt_out.

--
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+unsubscribe@googlegroups.com.
To post to this group, send email to gamsworld@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/groups/opt_out.
Archiver
User
User
Posts: 7876
Joined: 7 years ago

Re: 814 GDX container with UNDF data values

Post by Archiver »


Dear Renger,

Thank you very much for taking the time! I really appreciate it! I never imagined that the extension file was the problem. It runs now, however, I am still getting the following error: 13 system failure. Could not initialize environment. Rc=1 Msg=Operation not permitted. Error: Solver "CONOPT" returned with nonzero exitcode 1. I have tried with other solvers such as MINOS 5 and CONOPT3 but the error prevails.

Any suggestion about where I should look at to fix it?

Thanks a lot!
Luis


On Saturday, March 1, 2014 12:48:23 PM UTC+1, Renger van Nieuwkoop wrote:

Hi José



Your file is an exel file with xlsx as extension. In your code you have xls instead of xlsx in the gdxxrw command. Runs fine after correction.



Cheers

Renger

____________________

Modelworks

Gewerbestrasse 15

3600 Thun – Switzerland

+41 79 818 53 73

In...@modelworks.ch

blog.modelworks.ch





From: gams...@googlegroups.com [mailto:gams...@googlegroups.com] On Behalf Of José Luis Viveros Añorve
Sent: Freitag, 28. Februar 2014 21:04
To: gams...@googlegroups.com
Subject: 814 GDX container with UNDF data values



Hello everyone,



I am trying to balance a social accounting matrix using the pep (Université Laval) GAMS code but I am getting the following error: 814 GDX container with UNDF data values. I don't understand why. I do not have any undefined value. I have checked carefully but haven't managed to solve it yet. I would really appreciate if you could take a quick look at it and help me fix it please! The SAM has only minor unbalances, as you will see in the excel file. Please find attached my files.



Thank you very much for your time and answer!



Best,

Luis Añorve,

University of Bonn

--
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+...@googlegroups.com.
To post to this group, send email to gams...@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/groups/opt_out.

--
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+unsubscribe@googlegroups.com.
To post to this group, send email to gamsworld@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/groups/opt_out.
Archiver
User
User
Posts: 7876
Joined: 7 years ago

RE: 814 GDX container with UNDF data values

Post by Archiver »


Hi Luis

This sounds like a system error. I can’t answer that (especially as the model runs fine on my machine). If nobody answers, try to contact gams support (support@gams.com)-

Cheers

Renger



From: gamsworld@googlegroups.com [mailto:gamsworld@googlegroups.com] On Behalf Of José Luis Viveros Añorve
Sent: Montag, 3. März 2014 12:47
To: gamsworld@googlegroups.com
Subject: Re: 814 GDX container with UNDF data values



Dear Renger,



Thank you very much for taking the time! I really appreciate it! I never imagined that the extension file was the problem. It runs now, however, I am still getting the following error: 13 system failure. Could not initialize environment. Rc=1 Msg=Operation not permitted. Error: Solver "CONOPT" returned with nonzero exitcode 1. I have tried with other solvers such as MINOS 5 and CONOPT3 but the error prevails.



Any suggestion about where I should look at to fix it?



Thanks a lot!

Luis




On Saturday, March 1, 2014 12:48:23 PM UTC+1, Renger van Nieuwkoop wrote:

Hi José



Your file is an exel file with xlsx as extension. In your code you have xls instead of xlsx in the gdxxrw command. Runs fine after correction.



Cheers

Renger

____________________

Modelworks

Gewerbestrasse 15

3600 Thun – Switzerland

+41 79 818 53 73

In...@modelworks.ch

blog.modelworks.ch





From: gams...@googlegroups.com [mailto:gams...@googlegroups.com] On Behalf Of José Luis Viveros Añorve
Sent: Freitag, 28. Februar 2014 21:04
To: gams...@googlegroups.com
Subject: 814 GDX container with UNDF data values



Hello everyone,



I am trying to balance a social accounting matrix using the pep (Université Laval) GAMS code but I am getting the following error: 814 GDX container with UNDF data values. I don't understand why. I do not have any undefined value. I have checked carefully but haven't managed to solve it yet. I would really appreciate if you could take a quick look at it and help me fix it please! The SAM has only minor unbalances, as you will see in the excel file. Please find attached my files.



Thank you very much for your time and answer!



Best,

Luis Añorve,

University of Bonn

--
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+...@googlegroups.com.
To post to this group, send email to gams...@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/groups/opt_out.

--
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+unsubscribe@googlegroups.com.
To post to this group, send email to gamsworld@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/groups/opt_out.

--
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+unsubscribe@googlegroups.com.
To post to this group, send email to gamsworld@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/groups/opt_out.
Archiver
User
User
Posts: 7876
Joined: 7 years ago

Re: 814 GDX container with UNDF data values

Post by Archiver »


OK! Thanks, Renger!

Have an excellent day!

Cheers,
Luis


On Monday, March 3, 2014 12:49:39 PM UTC+1, Renger van Nieuwkoop wrote:

Hi Luis

This sounds like a system error. I can’t answer that (especially as the model runs fine on my machine). If nobody answers, try to contact gams support (sup...@gams.com)-

Cheers

Renger



From: gams...@googlegroups.com [mailto:gams...@googlegroups.com] On Behalf Of José Luis Viveros Añorve
Sent: Montag, 3. März 2014 12:47
To: gams...@googlegroups.com
Subject: Re: 814 GDX container with UNDF data values



Dear Renger,



Thank you very much for taking the time! I really appreciate it! I never imagined that the extension file was the problem. It runs now, however, I am still getting the following error: 13 system failure. Could not initialize environment. Rc=1 Msg=Operation not permitted. Error: Solver "CONOPT" returned with nonzero exitcode 1. I have tried with other solvers such as MINOS 5 and CONOPT3 but the error prevails.



Any suggestion about where I should look at to fix it?



Thanks a lot!

Luis




On Saturday, March 1, 2014 12:48:23 PM UTC+1, Renger van Nieuwkoop wrote:

Hi José



Your file is an exel file with xlsx as extension. In your code you have xls instead of xlsx in the gdxxrw command. Runs fine after correction.



Cheers

Renger

____________________

Modelworks

Gewerbestrasse 15

3600 Thun – Switzerland

+41 79 818 53 73

In...@modelworks.ch

blog.modelworks.ch





From: gams...@googlegroups.com [mailto:gams...@googlegroups.com] On Behalf Of José Luis Viveros Añorve
Sent: Freitag, 28. Februar 2014 21:04
To: gams...@googlegroups.com
Subject: 814 GDX container with UNDF data values



Hello everyone,



I am trying to balance a social accounting matrix using the pep (Université Laval) GAMS code but I am getting the following error: 814 GDX container with UNDF data values. I don't understand why. I do not have any undefined value. I have checked carefully but haven't managed to solve it yet. I would really appreciate if you could take a quick look at it and help me fix it please! The SAM has only minor unbalances, as you will see in the excel file. Please find attached my files.



Thank you very much for your time and answer!



Best,

Luis Añorve,

University of Bonn

--
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+...@googlegroups.com.
To post to this group, send email to gams...@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/groups/opt_out.

--
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+...@googlegroups.com.
To post to this group, send email to gams...@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/groups/opt_out.

--
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+unsubscribe@googlegroups.com.
To post to this group, send email to gamsworld@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/groups/opt_out.
Archiver
User
User
Posts: 7876
Joined: 7 years ago

Re: 814 GDX container with UNDF data values

Post by Archiver »


Hi Jose,

I am having the same problem to run GAMS, I getting the following error: 13 system failure. Could not initialize environment. Rc=1 Msg=Operation not permitted. Error: Solver returned with nonzero exitcode 1.


My version of GAMS is 24.1.3, which I have a license to run, MS windows 64 , CPLEX solver.


How you solved your problem?



Any suggestion how to fix it?




Thanks in advance.



On Monday, March 3, 2014 at 10:31:02 PM UTC+10, José Luis Viveros Añorve wrote:

OK! Thanks, Renger!

Have an excellent day!

Cheers,
Luis


On Monday, March 3, 2014 12:49:39 PM UTC+1, Renger van Nieuwkoop wrote:

Hi Luis

This sounds like a system error. I can’t answer that (especially as the model runs fine on my machine). If nobody answers, try to contact gams support (sup...@gams.com)-

Cheers

Renger



From: gams...@googlegroups.com [mailto:gams...@googlegroups.com] On Behalf Of José Luis Viveros Añorve
Sent: Montag, 3. März 2014 12:47
To: gams...@googlegroups.com
Subject: Re: 814 GDX container with UNDF data values



Dear Renger,



Thank you very much for taking the time! I really appreciate it! I never imagined that the extension file was the problem. It runs now, however, I am still getting the following error: 13 system failure. Could not initialize environment. Rc=1 Msg=Operation not permitted. Error: Solver "CONOPT" returned with nonzero exitcode 1. I have tried with other solvers such as MINOS 5 and CONOPT3 but the error prevails.



Any suggestion about where I should look at to fix it?



Thanks a lot!

Luis




On Saturday, March 1, 2014 12:48:23 PM UTC+1, Renger van Nieuwkoop wrote:

Hi José



Your file is an exel file with xlsx as extension. In your code you have xls instead of xlsx in the gdxxrw command. Runs fine after correction.



Cheers

Renger

____________________

Modelworks

Gewerbestrasse 15

3600 Thun – Switzerland

+41 79 818 53 73

In...@modelworks.ch

blog.modelworks.ch





From: gams...@googlegroups.com [mailto:gams...@googlegroups.com] On Behalf Of José Luis Viveros Añorve
Sent: Freitag, 28. Februar 2014 21:04
To: gams...@googlegroups.com
Subject: 814 GDX container with UNDF data values



Hello everyone,



I am trying to balance a social accounting matrix using the pep (Université Laval) GAMS code but I am getting the following error: 814 GDX container with UNDF data values. I don't understand why. I do not have any undefined value. I have checked carefully but haven't managed to solve it yet. I would really appreciate if you could take a quick look at it and help me fix it please! The SAM has only minor unbalances, as you will see in the excel file. Please find attached my files.



Thank you very much for your time and answer!



Best,

Luis Añorve,

University of Bonn

--
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+...@googlegroups.com.
To post to this group, send email to gams...@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/groups/opt_out.

--
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+...@googlegroups.com.
To post to this group, send email to gams...@googlegroups.com.
Visit this group at http://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/groups/opt_out.

--
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+unsubscribe@googlegroups.com.
To post to this group, send email to gamsworld@googlegroups.com.
Visit this group at https://groups.google.com/group/gamsworld.
For more options, visit https://groups.google.com/d/optout.
JJcoul09
User
User
Posts: 16
Joined: 2 years ago

Re: 814 GDX container with UNDF data values

Post by JJcoul09 »

Salut Luis,
J'espère que tu te portes bien.
Je rencontre exactement le même problème que vous il y a 7 ans de cela. En effet, dans l'exécution de mon code GAMS, le logiciel GAMS affiche:
l'erreur suivante : 13 défaillance du système. Impossible d'initialiser l'environnement. Rc=1 Msg=Opération non autorisée. Erreur : le solveur "CONOPT" est renvoyé avec un code de sortie 1 différent de zéro.
J'aimerais savoir comment vous avez procéder pour régler le votre?

Il convient de souligner que pour le même code je n'avais pas ce problème. Mais depuis quelques jours j'ai ré exécuter le même code sans apporter de modification et voici que ce message apparaît.

Merci de faire bon accueil au message. Bien à vous.

Cordialement
Post Reply