I got stuck in how to transfer the table/parameter data with different index but the same length. Take the following as an example:
Code: Select all
Set
l All Trans. Lines/l1*l81/
cl(l) Candidate Trans. Lines /l7*l81/
cl1(cl) Candidate Trans. Lines /l7*l21/
cl2(cl) /l22*l36/ ;
Table CLDATA1(cl1, *) Trans. Lines Data
X FLmax IC
l7 0.40 100 7723.2
l8 0.38 100 7337.04
l9 0.60 80 11584.8
l10 0.20 100 3861.6
l11 0.68 70 13129.44
l12 0.20 100 3861.6
l13 0.40 100 7723.2
l14 0.31 100 5985.48
l15 0.30 100 5792.4
l16 0.59 82 11391.72
l17 0.20 100 3861.6
l18 0.48 100 9267.84
l19 0.63 75 12164.04
l20 0.30 200 5792.4
l21 0.61 78 11777.88
;
Table CLDATA2(cl2, *) Trans. Lines Data;
Best,
Gabriel