Equation

Problems with modeling
Post Reply
Omi
User
User
Posts: 7
Joined: 4 years ago

Equation

Post by Omi »

In the attachment, 1) constraint 12 has variable x(i,t) but how write that constraint? Do I have to specify three variables x, x1, x0? where x is amount produced.

2) constraint 15, How to write last summation part which is multiplied by M? (k=t+1) to (s-1)

Thank you.
Attachments
Capture.PNG2.PNG
User avatar
Renger
Posts: 639
Joined: 7 years ago

Re: Equation

Post by Renger »

Hi Omi

1) Only X^0 seems to be an additional variable. X^(-1) is just 1/X.
2) just multiply it with the sum?

Cheers
Renger
BTW: You should start submitting your own code by now, so people can answer your questions more easily building on what you submit.
____________________________________
Enjoy modeling even more: Read my blog on modeling at The lazy economist
Omi
User
User
Posts: 7
Joined: 4 years ago

Re: Equation

Post by Omi »

Hello Renger,
Thank you for your response.
This is the code I tried to write for the above constraints 12 to 15.
is this correct?
x is a production amount for product j and I want to split this amount.

Code: Select all

ct3(j,t)..x(j,t)=e=x1(j,t)+x0(j,t);

ct4(j,t)..x1(j,t)=l=M*z(j,t);

ct5(j,t)..x0(j,t)=g=mi*(sum((jj),U(jj,j,t)-z(j,t+1)));

ct6(j,t,s)..x0(j,t)+sum(k$(ord(k)=ord(t)+1),x1(j,k))=g=mi*sum(jj,U(jj,j,t))-M*(sum(k$(ord(k)=ord(t)+1),R(k))+1-R(s));
User avatar
Renger
Posts: 639
Joined: 7 years ago

Re: Equation

Post by Renger »

Hi Omi

It looks fine to me. If you not sure, if the equation does the right thing, you could initialize the variables in the equations to some values, and define checking parameters to see what they produce.
Here a small example:

Code: Select all

set i /1*4/;
variable X(i), OBJ;

equation c1;
c1.. OBJ =E= sum(i, X(i));

* Checking the equations
X.L(i) = 1;

parameter check;
check = sum(i, X.L(i));
display check;
Check should now have 4 as value. You could do the same thing with the equations of your model.

Cheers

Renger

BTW: If you sent code, make sure it runs. In order to check your equations by running the code, I had to make some assumptions and so it is hard to say if the equations are really correct.
I had to add the following to be able to run the code:

Code: Select all

set i /1*4/,  t /1*4/,  j /1*2/;

alias(k,s,t);

variables r(k), x(j,t), x1(j,t), x0(j,t), z(j,t);

parameter M /1000/, mi /199/;

parameter u(j,j,t);

alias(j,jj);

equations ct3, ct4, ct5,ct6;
____________________________________
Enjoy modeling even more: Read my blog on modeling at The lazy economist
Post Reply