Hi Jose,
I am having the same problem to run GAMS, I getting the following error: 13 system failure. Could not initialize environment. Rc=1 Msg=Operation not permitted. Error: Solver returned with nonzero exitcode 1.
My version of GAMS is 24.1.3, which I have a license to run, MS windows 64 , CPLEX solver.
How you solved your problem?
Any suggestion how to fix it?
Thanks in advance.
On Monday, March 3, 2014 at 10:31:02 PM UTC+10, José Luis Viveros Añorve wrote:
OK! Thanks, Renger!
Have an excellent day!
Cheers,
Luis
On Monday, March 3, 2014 12:49:39 PM UTC+1, Renger van Nieuwkoop wrote:
Hi Luis
This sounds like a system error. I can’t answer that (especially as the model runs fine on my machine). If nobody answers, try to contact gams support (sup...@gams.com)-
Cheers
Renger
From: gams...@googlegroups.com [mailto:gams...@googlegroups.com] On Behalf Of José Luis Viveros Añorve
Sent: Montag, 3. März 2014 12:47
To: gams...@googlegroups.com
Subject: Re: 814 GDX container with UNDF data values
Dear Renger,
Thank you very much for taking the time! I really appreciate it! I never imagined that the extension file was the problem. It runs now, however, I am still getting the following error: 13 system failure. Could not initialize environment. Rc=1 Msg=Operation not permitted. Error: Solver "CONOPT" returned with nonzero exitcode 1. I have tried with other solvers such as MINOS 5 and CONOPT3 but the error prevails.
Any suggestion about where I should look at to fix it?
Thanks a lot!
Luis
On Saturday, March 1, 2014 12:48:23 PM UTC+1, Renger van Nieuwkoop wrote:
Hi José
Your file is an exel file with xlsx as extension. In your code you have xls instead of xlsx in the gdxxrw command. Runs fine after correction.
Cheers
Renger
____________________
Modelworks
Gewerbestrasse 15
3600 Thun – Switzerland
+41 79 818 53 73
In...@modelworks.ch
blog.modelworks.ch
From: gams...@googlegroups.com [mailto:gams...@googlegroups.com] On Behalf Of José Luis Viveros Añorve
Sent: Freitag, 28. Februar 2014 21:04
To: gams...@googlegroups.com
Subject: 814 GDX container with UNDF data values
Hello everyone,
I am trying to balance a social accounting matrix using the pep (Université Laval) GAMS code but I am getting the following error: 814 GDX container with UNDF data values. I don't understand why. I do not have any undefined value. I have checked carefully but haven't managed to solve it yet. I would really appreciate if you could take a quick look at it and help me fix it please! The SAM has only minor unbalances, as you will see in the excel file. Please find attached my files.
Thank you very much for your time and answer!
Best,
Luis Añorve,
University of Bonn
--
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+...@googlegroups.com.
To post to this group, send email to gams...@googlegroups.com.
Visit this group at
http://groups.google.com/group/gamsworld.
For more options, visit
https://groups.google.com/groups/opt_out.
--
To unsubscribe from this group and stop receiving emails from it, send an email to gamsworld+...@googlegroups.com.
To post to this group, send email to gams...@googlegroups.com.
Visit this group at
http://groups.google.com/group/gamsworld.
For more options, visit
https://groups.google.com/groups/opt_out.
--
To unsubscribe from this group and stop receiving emails from it, send an email to
gamsworld+unsubscribe@googlegroups.com.
To post to this group, send email to
gamsworld@googlegroups.com.
Visit this group at
https://groups.google.com/group/gamsworld.
For more options, visit
https://groups.google.com/d/optout.